On-Screen Displays And Data Code - Canon DC410 Instruction Manual

Applying
1
Press to display the joystick
guide.
If does not appear on the joystick
guide, repeatedly push the joystick
( ) toward [NEXT] to display it.
2
Push the joystick (
• The icon of the selected digital
effect turns green.
• Push the joystick (
again to deactivate the digital effect
(its icon will turn white again).
T F I
O ADE N
Activate the selected fader in record
pause mode (
Start/Stop to start recording with a fade
in.
T F O
O ADE UT
Activate the selected fader while
recording ( ), then press
fade out and pause the recording.
T
O ACTIVATE AN EFFECT
mode: Activate the selected
effect while recording or in record pause
mode.
mode: Activate the selected
effect and then press
record the still image.
Downloaded From VideoCamera-Manual.com Manuals
42 •
Video
NEXT
) toward
) toward
), then press
Start/Stop
Start/Stop
to
NOTES
• When you apply a fader, not only the
picture but also the sound will fade in or
out. When you apply an effect, the sound
will be recorded normally.
• The camcorder retains the last setting
used even if you turn off the digital
effects or change the recording program.

On-Screen Displays and Data Code

.
You can turn most on-screen displays
on or off.
Repeatedly press
on-screen displays on/off in the
following sequence:
• All displays on
• Most displays off*
to
mode:
• All displays on
• Data code only
• All displays off
mode:
• All displays on
• Regular displays only (removes the
histogram and information icons)
• All displays off
DISP.
to turn the
, mode: