Preparations
Accessories
Fasten the grip belt.
• Adjust the grip belt so that you can
reach the zoom lever with your index
Start/Stop
finger, and the
your thumb.
• You can remove the grip belt and
replace it with the supplied wrist strap.
T
O REMOVE THE GRIP BELT
1 Lift the padded handgrip's flap
and detach the strap from the
Velcro pad.
2 Pull the strap to remove it first
from the front bracket on the
camcorder, then to unthread it
from the handgrip and finally to
remove it from the rear bracket on
the camcorder.
20
Pass the attaching end of the wrist
strap through the back bracket on
the camcorder, thread the wrist strap
through the loop and fasten.
button with
You can also attach the wrist strap to
the strap mount on the grip belt to use
both for extra convenience and
protection.
Pass the ends of the shoulder strap
through the strap mount on the grip
belt and adjust the length of the
strap.
T
O ATTACH A WRIST STRAP
T
O ATTACH A SHOULDER STRAP