Locating The Endof The Last Scene; On-Screen Displays(Data Code) - Canon ZR960 Instruction Manual

Locating the Endof the Last Scene On-Screen Displays(Data Code)
After playing back a tape, use this
function to locate the end of the last
scene recorded in order to continue
recording from that point.
switch: I
_ PO(NTS TOCHECK
Stop the playback before using this
function.
_O
[_,| END SEARCH] O [EXECUTE]
• [END SEARCH] appears.
• The camcorder rewinds/fast forwards
the tape, plays back the last few
seconds of the recording and stops
the tape.
• To cancel the end search push the
joystick (Y) toward II.
• End search cannot be used once you
remove the cassette.
• If there are blank sections between
recordings, the end search may not
work correctly.
The camcorder keeps a data code
containing the date and time of
recording. You can select the data to be
displayed.
switch: I
Options
* Default value
No data code display.
Displays thedateor time whenthescenewas
recorded.
Displays both the date and time of the recording.
iFUNCi C_
[--_1_ MENU] O
[_ DISPLAY SETUP/(_)] O
[DATA CODE] O Desired option O
iFUNC:
28 ° Video