Adjusting The Position And Brightness Of The Lcd Screen - Canon Legira FS 20 Instruction Manual

You can also remove the grip belt and
attach the shoulder strap directly to the
rear bracket on the camcorder.
T
O REATTACH THE GRIP BELT
1 Pass the end of the strap through
the rear bracket on the
camcorder.
2 Thread the strap through the
padded handgrip and then pass it
through the front bracket on the
camcorder.
3 Fasten the grip belt as necessary,
attach the strap to the Velcro pad
on the handgrip and close the flap.
Adjusting the Position and Brightness
of the LCD Screen
Rotating the LCD Panel
Open the LCD panel 90 degrees.
• You can rotate the panel 90 degrees
downward.
• You can rotate the panel 180 degrees
toward the lens. Rotating the LCD
panel 180 degrees can be useful in
the following cases:
- When you wish to include yourself in
the picture when recording with the
self timer.
- To allow the camcorder to be
operated with the wireless controller
from the front.
180°
90°
Subject can monitor the LCD screen
NOTES
About the LCD screen: The screen is
produced using extremely high-precision
manufacturing techniques, with more than
99.99% of the pixels operating to
specification. Less than 0.01% of the
pixels may occasionally misfire or appear
as black, red, blue or green dots. This has
no effect on the recorded image and does
not constitute a malfunction.
180°
21