Canon Legira FS 20 Instruction Manual page 76

External Connections
4
Press the start button on the DVD
burner.
• A progress bar will be displayed on
the screen.
• After pressing the start button
(while the current disc is being
written) the operation cannot be
canceled.
• When the disc (or the last disc, if
the data requires multiple discs) is
finalized, [TASK COMPLETED] will
be displayed. Take out the disc
and close the disc tray.
W
HEN THE DATA REQUIRES MULTIPLE DISCS
After a disc is finalized it will be ejected
automatically and [INSERT A NEW/
BLANK DISC AND CLOSE THE DISC
TRAY] will appear. Insert the next disc
and close the disc tray.
T
O CREATE AN ADDITIONAL COPY OF THE
SAME DISC
After the operation is finished, [INSERT
A NEW/BLANK DISC] will be displayed
again. Insert a brand new disc and
close the disc tray.
T DVD
O PLAY BACK A
Discs created with this camcorder and
the DVD burner can be played back on
DVD players and computers that meet
the following requirements:
• Compatible with the discs you
created (DVD-R/DVD-R DL/DVD-RW
discs)
• Compatible with DVD-Video
specifications
76
DISC
• DVD playback software that is
installed and running (in the case of
computers)
Refer to the instruction manual of the
external device and make sure it is
compatible.
IMPORTANT
• While the camcorder is connected to the
DVD burner, do not open the memory
card slot cover and do not remove the
memory card.
• Observe the following precautions while
the ACCESS indicator on the camcorder
is on or flashing. Failing to do so may
result in permanent data loss.
- Do not open the memory card slot
cover.
- Do not disconnect the USB cable.
- Do not disconnect the power source
or turn off the camcorder or the DVD
burner.
• When creating discs with the optional
DW-100 DVD Burner, you cannot add,
using the [PLAYLIST] option, scenes
recorded while the pre-recording
function was on or divided scenes. To
add such scenes, use the [ALL
SCENES] or [REM.SCENES] option.
• For important information on handling
your discs, refer to
on handling.
NOTES
• The FUNC. menu and setup menus
cannot be accessed while the
camcorder is connected to the DVD
burner.
• Disconnect the USB cable before
changing the operating mode.
• The amount of time required for step 2
depends on how many scenes are being
included on a disc. We recommend
keeping the number of scenes to 2000
Cautions