On-Screen Displays And Data Code - Canon FS30 Quick Manual

Video
Applying
1
Push the joystick (
the joystick guide.
2
Select ( ) [D.EFFECT
press .
• The icon of the selected effect
turns green.
• Press again to deactivate the
digital effect (its icon will turn white
again).
T
O FADE IN
Activate the selected fader in record
pause mode ( ), then press
to start recording with a fade in.
T
O FADE OUT
Activate the selected fader while
recording ( ), then press
fade out and pause the recording.
T
O ACTIVATE AN EFFECT
mode: Activate the selected effect
while recording or in record pause
mode.
mode: Activate the selected effect
PHOTO
and then press
photo.
52
• When you apply a fader, not only the
• The camcorder retains the last setting
) to display
] and

On-Screen Displays and Data Code

With every scene or photo recorded,
the camcorder keeps a data code that
includes the date, time and information
about the camera setup at the time of
recording. While viewing a photo, all the
Start/Stop
data is displayed in the form of
information icons. During movie
playback you can select what to display
with the [DATA CODE] setting (
You can also turn most on-screen
displays on or off.
Start/Stop
to
Repeatedly press
on-screen displays on/off in the
to record the
following sequence:
• All displays on
• Most displays off*
NOTES
picture but also the sound will fade in or
out. When you apply an effect, the
sound will be recorded normally.
used even if you turn off the digital
effects or change the recording
program.
DISP.
, mode:
84).
to turn the