Sony DSR-PD150P Operating Instructions Manual page 90

Setting time values
Turn the SEL/PUSH EXEC dial to select SET, then press the dial.
(10)
(11)
Turn the SEL/PUSH EXEC dial to select TC RUN, then press the dial.
(12) Turn the SEL/PUSH EXEC dial to select the desired running mode, then press
the dial.
REC RUN: Time code value advances only while recording. When making the
time code continuous at back space editing, select this setting.
FREE RUN: Time code advances freely regardless of the camcorder's current
operation mode.
For more information on the running mode, see "Making the time code
continuous at back space editing" on page 91.
To cancel the time code setting
Select CANCEL in step 10, then press the SEL/PUSH EXEC dial.
To reset the time code
Select RESET in step 7, then press the SEL/PUSH EXEC dial.
90