Superimposing a still image in a "Memory Stick" on a moving
picture - MEMORY MIX
Before operation
Insert a recorded Memory Stick" and a tape to be recorded into your camcorder
Set the POWER switch to CAMERA
(1)
Press MEMORY MIX in standby mode
(2)
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image
Press MEMORY+/- or +/- on the Remote Commander to select the still
(3)
image you want to superimpose
To see the previous image press MEMORY - or - on the Remote Commander
To see the next image press MEMORY+ or + on the Remote Commander
Turn the SEL/PUSH EXEC dial to select the desired mode
(4)
The mode changes as follows
Press the SEL/PUSH EXEC dial
(5)
The still image is superimposed on the moving picture, and your camcorder ii
in standby mode
Turn the SEL/PUSH EXEC dial to adjust the effect
(6)
(7)
122
Press START/STOP to start recording