1. Manuals
  2. Brands
  3. APW Wyott Manuals
  4. Griddle
  5. EGD-48
  6. Product manual

APW Wyott EGD-48 Product Manual

Electric griddles, drop-in style
Hide thumbs Also See for EGD-48:
Table of Contents

Advertisement

Quick Links

Download this manual
PRODUCT MANUAL
Installation Instructions
Operation Instructions
Maintenance Instructions
Replacement Parts List
Warranty/Service Information
ELECTRIC GRIDDLES, DROP-IN STYLE
FOR YOUR SAFETY
Do not store or use gasoline or other flamma-
ble vapors or liquids in the vicinity of this or
any other appliance.
!
Im-
alteration, service or maintenance can cause
property damage, injury or death. Read the
installation, operating and maintenance
instructions thoroughly before installing or ser-
vicing this equipment.
APW/WYOTT Foodservice Equipment Co.
Cheyenne, WY 82003
FAX (307) 637-8071
Safety Instructions
Model: EGD-48
And
Model: EGD-72
WARNING
proper installation, adjustment,
P.O. Box 1829
(307) 634-5801
IMPORTANT
FOR FUTURE REFERENCE
Please complete this information
and retain this manual for the life
of the equipment.
MODEL #———————————————————
SERIAL #———————————————————
DATE PURCHASED——————————————
For Warranty Service and/or Parts this
information is required.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EGD-48 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for APW Wyott EGD-48

Summary of Contents for APW Wyott EGD-48

  • Page 1 Operation Instructions Maintenance Instructions Replacement Parts List Warranty/Service Information ELECTRIC GRIDDLES, DROP-IN STYLE Model: EGD-48 Model: EGD-72 FOR YOUR SAFETY Do not store or use gasoline or other flamma- ble vapors or liquids in the vicinity of this or any other appliance.
  • Page 2 ! CAUTION These models are designed, built and sold for commercial use. If these models are positioned so the general public can use the equipment, make sure that all cautions, warnings and operating instructions are clearly posted near each unit so that anyone using the equipment will use it correctly and not injure themselves or harm the equipment.

  • Page 3: Table Of Contents

    Specifications ........... 4 Installation ............ 4-6 Operating Information ........7 Cleaning / Maintenance ......... 7-8 Service / Repair ..........8 Wiring Diagram, EGD-48 ........8 Wiring Diagram, EGD-72 ........9 Parts Diagram ........... 10-11 Warranty ............12 LOCATION OF DATA PLATE The data plate is located on the front panel.

  • Page 4: Specifications

    Specifications And Dimensions: Model Width Depth Height No. of kW Per Total in. (mm) in. (mm) in. (mm) Elements Element EGD-48 49.0/125 29.5/75 0.31/0.8 21.6 EGD-72 72.0/191 29.5/75 0.31/0.8 32.4 EGD-72 72.0/191 32.5/83 0.31/0.8 32.4 Double Trough Griddle Surface Dimensions: Model Width in./cm...
  • Page 5 FIGURE 3 FIGURE 5 FIGURE 4 FIGURE 6 Electrical Connections Terminal Box Location: The terminal boxes can be located at either the left front or right rear of the griddle. When shipped from the factory the device has the terminal box attached in the left front position. The box can be relocated to the alternate position by removing two screws.

  • Page 6: Installation

    4. Controls shall be mounted on the front vertical surface of the fixture. 5. For supply connections, use wire suitable for at least 90 degrees Celsuis (194 degrees Fahrenheit). NOTES: 1. Griddle can be mounted with the trough in the front or rear, dimensions shown are for front trough mounting. For rear trough mounting, this dimension must be between 7/8 inch and 2 inches.

  • Page 7: Operating Information

    2. Load Griddle. After preheating, load griddle and cook according to recipe. Turn foods halfway through cooking time unless otherwise specified in recipe. 3. Economy Hint. Turn griddle OFF (or to lowest thermostat setting) during idle periods. MODEL EGD-48 MODEL EGD-72 BOTH MODELS...

  • Page 8: Service / Repair

    The nameplate indicating the pertinent electrical data of the griddle is located in the front of the grease drawer receptacle and can be seen readily when the drawer is removed. WIRING DIAGRAM, EGD-48...

  • Page 10: Parts Diagram

    PARTS BREAK DOWN DROP-IN ELECTRIC GRIDDLES, EGD-48 AND EGD-72 ITEM NUMBER PART NUMBER DESCRIPTION 14397-25 HEATING ELEMENT, 208 VOLT 14397-26 HEATING ELEMENT, 240 VOLT 642567-01 PRESSURE PLATE 646378-03 BULB CLAMP ASSEMBLY 646251-01 BAFFLE 642578-01 TERMINAL BLOCK BOX 642579-01 BOX COVER...
  • Page 11 PARTS PICTURE GOES HERE...

  • Page 12: Warranty

    APW/WYOTT EQUIPMENT LIMITED WARRANTY APW/WYOTT Foodservice Equipment Company warrants its equipment against defects in materials and workmanship, subject to the fol- lowing conditions: This warranty applies to the original owner only and is not assignable. Should any product fail to function in its intended manner under normal use within the limits defined in this warranty, at the option of APW/ WYOTT such product will be repaired or replaced by APW/WYOTT or its Authorized Service Agency.

This manual is also suitable for:

Egd-72

Table of Contents