Upgrading Through Usb - GE Security Digia Installation Manual

36 Digia
Installation Manual
Figure 19. Engineering mode

Upgrading through USB

To upgrade the firmware through a USB connection, do the
following:
CAUTION:
1. Create a directory under the root directory of the USB
device called upgrade.
2. Copy the updated firmware (*.bin) to the directory you
just created and rename the file app.bin. To obtain the
updated firmware, contact technical support.
3. Connect the USB device to the USB port on the front of
the Digia.
Upgrade procedures may change between releases of
firmware updates. Refer to the release notes included
with each firmware update before proceeding with the
upgrade process.