Network Client; Bi Directional Audio - GE Security Digia Installation Manual

29

Network client

Digia provides a live remote monitoring feature. For remote
monitoring, users of Digia are required to install and run a Digia
client program on a PC (Figure 14). A LAN connection using the
RJ45 connection on the back is required for a remote connection.
Figure 14. Digia client
When the Digia is not recording, the Digia client monitors video
at 1 frame per second. When the Digia is recording, the Digia
client monitors video at the established recording rate.

Bi directional audio

The Digia client allows for bi directional audio between the client
and the Digia unit. On the PC, to use bi directional audio, you
will need a sound card capable of handling a microphone and
speakers. On the Digia side, you will need to connect a
microphone to the audio in connection, and a pair of amplified
speakers to the audio out connection.