GE Security Digia Installation Manual page 24

20 Digia
Installation Manual
ADSL
To use the ADSL option when connecting your Digia to a
network, the following information is required. If you do not have
this information, see your network administrator.
Table 10.
Item
ID
Password
Your ADSL connection must have an RJ45 connector output to
connect to the Digia.
If you want to share your connection with other devices, you will
need to use an IP sharing device. In this case, select LAN as the
Network Type. You will also need to configure your IP sharing
device for port forwarding to allow for a network connection. For
more information on port forwarding, see the documentation for
your IP sharing device, or your network administrator.
Description
The user ID for your ADSL connection.
The password for your ADSL connection.