Table of Contents
Advertisement
HOW TO PREPARE THE MACHINE FOR
OPERATION
To assemble the handle do the following:
1. Connect the handle sections together with two
hexagon screws (see figure 1).
2. Fasten the handle into the housing with a locking
screw (see figure 2).
To install the dust bag follow this procedure:
1. Loosen the knobs ( see figure 3, #1) at the rear
opening of the housing.
2. Slide the bag adaptor opening (see figure 3, #2) up
and around the knobs.
3. Tighten the knobs.
4. Fasten the dust bag to the clip on the handle (see
figure 4.)
Page -4-
Figure 1
Figure 2
1
1
2
Figure 3
Figure 4
Clarke
®
Operator's Manual Model 560 B
2
Advertisement
Table of Contents
