Table of Contents
Advertisement
Quick Links
D14 & D18
Operator's
Upright
Manual
Vacuum
READ THIS BOOK
This book has important information for the use and safe operation of this machine. Failure to read this
book prior to operating or attempting any service or maintenance procedure to your Clarke machine
could result in injury to you or to other personnel; damage to the machine or to other property could occur
as well. You must have training in the operation of this machine before using it. If your operator(s) cannot
read English, have this manual explained fully before attempting to operate this machine.
Si Ud. o sus operadores no pueden leer el Inglés, se hagan explicar este manual completamente antes
de tratar el manejo o servicio de esta máquina.
All directions given in this book are as seen from the operator's position at the rear of the machine.
For new books write to: Clarke
®
, 2100 Highway 265, Springdale, Arkansas 72764.
®
Clarke
Form No. 70720A 2/06
Printed in the USA
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Clarke D14
Summary of Contents for Clarke D14
- Page 1 This book has important information for the use and safe operation of this machine. Failure to read this book prior to operating or attempting any service or maintenance procedure to your Clarke machine could result in injury to you or to other personnel; damage to the machine or to other property could occur as well.
-
Page 2: Table Of Contents
Parts List #1 Upper Canister Assembly ... 21 Drawing #2 Brush Housing Assembly ... 22 Parts List #2 Brush Housing Assembly ... 23 Parts List #3 Hose Wand and Handle Assembly ... 24 Table of Contents Clarke ® Operator's Manual - D14 & D18... -
Page 3: Important Safety Instructions
5. Use only as described in this manual. Use only manufacturer's recommended attachments. 6. Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center. -
Page 4: Save These Instructions
17. Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present. 18. Unplug the machine before servicing the belt or brush. The brush may start suddenly and cause injury. SAVE THESE INSTRUCTIONS ® Clarke Operator's Manual - D14 & D18... -
Page 5: Machine Specifications
INTRODUCTION The D14 and D18 are upright vacuums for cleaning carpet. These machines are used to remove dry material from carpet. These machines are intended for commercial use. Model Power Supply Vacuum Motor Brush RPM Cord Wheels (2) Wand Hose... -
Page 6: Grounding Instructions
Do not try to fit a three-termi- nal plug into a receptacle or connector body that does not fit the plug, see your Authorized Clarke Dealer to get an authorized person to make the connection. WARNING: Do not move the machine over an electrical cord. -
Page 7: How To Assemble The Machine
5, item A). This insures the handle is properly seated. c. Push handle latch into lock position (see figure 5, item B). Figure 5 Figure 2 Figure 3 Mark on handle tube. Figure 4 ® Clarke Operator's Manual - D14 & D18... - Page 8 To attach hose properly, depress lock on canister (see figure 7, item B). 8. Snap the crevice (B) and upholstery (C) tools into the tool retainer on rear of canister housing (see figure 6). ® Clarke Operator's Manual - D14 & D18 Figure 6 Figure 7...
-
Page 9: The Controls
The wand has a suction control sleeve (see figure 10). For normal vacuuming keep suction control sleeve closed. To reduce suction, when cleaning drapes or furniture, open suction control sleeve. Figure 9 Figure 11 Figure 10 ® Clarke Operator's Manual - D14 & D18... - Page 10 The cord storage hooks are on the back of the canister housing. The lower cord hook is also a carrying handle. The lower cord hook rotates to provide a quick cord release and to ease cord removal. ® Clarke Operator's Manual - D14 & D18 Figure 12 Figure 13...
-
Page 11: How To Operate The Machine
NOTE: The machine comes with a filter bag installed in the canister housing. Use the D14 & D18 as a carpet cleaner or as an upholstery cleaner. To operate the machine as a carpet cleaner, follow this procedure: 1. -
Page 12: Maintenance
Make sure the cardboard is pushed all the way on the bag adapter (figure 19) or the door will not latch. f. Close the canister housing. ® Clarke Operator's Manual - D14 & D18 Figure 17 Figure 18 Figure 19... -
Page 13: How To Replace The Brush
5. Install the new brush assembly. 6. Install the nozzle plate. 7. Put the machine on its wheels. WARNING: To reduce the risk of injury from moving parts, unplug before servicing. Figure 20 Figure 21 Figure 22 ® Clarke Operator's Manual - D14 & D18... -
Page 14: How To Change The Drive Belt
If the motor over heats, the thermal overload will stop the motor. If the motor stops, let the motor cool before restarting the machine. Check filters. If the motor continues to stop, consult an authorized service person. ® Clarke Operator's Manual - D14 & D18 Figure 23 Figure 24... -
Page 15: Brush Performance Indicator Lights
BRUSH PERFORMANCE INDICATOR LIGHTS The D14 and D18 upright vacuums have 3 brush perfor- mance indicator lights (see figure 25). They are GREEN, YELLOW and RED. They work in the following manner: Normal Operation: • The GREEN light is on when the brush drive motor is on and the brush height setting is correct for the carpet. - Page 16 D14 & D18 Section II Parts and Service Manual (70720A) ® Clarke Operator's Manual - D14 & D18...
-
Page 17: Drawing #1 Upper Canister Assembly
Clarke ® D14 & D18 Drawing #1 Upper Canister Assembly 2/04 Clarke ® Operator's Manual - D14 & D18... -
Page 18: Parts List #1 Upper Canister Assembly
Parts List #1 Upper Canister Assembly 2/06 Ref. NOTE: publication of this manual. ® Clarke Operator's Manual - D14 & D18 ® Clarke D14 & D18 Part No. Description 53296A Handle Tube 53199A Handle, Left 53207A Handle, Right 53320A On/Off Switch... -
Page 19: Drawing #2 Brush Housing Assembly
Clarke ® D14 & D18 Drawing #2 Brush Housing Assembly 2/04 Clarke ® Operator's Manual - D14 & D18... -
Page 20: Parts List #2 Brush Housing Assembly
Parts List #2 Brush Housing Assembly 7/04 Ref. ® Clarke Operator's Manual - D14 & D18 ® Clarke D14 & D18 Part No. Description 53231A Cover Asm., Brush Hsg. 14" 53232A Cover Asm., Brush Hsg. 18" (cover asm. include #2) - Page 21 ® Clarke D14 & D18 Electrical Schematic 1/06 (230V) BLUE BROWN(230V) (120V) (120V) GREEN/YELLOW (230V) GREEN (120V) BLACK Clarke ® Operator's Manual - D14 & D18...
Need help?
Do you have a question about the D14 and is the answer not in the manual?
Questions and answers