Download Print this page
Integra DHC-80.6 Basic Manual

Integra DHC-80.6 Basic Manual

Av controller
Hide thumbs Also See for DHC-80.6:

Advertisement

Quick Links

DHC-80.6
Basic Manual
Advanced Manual found here
http://integraworldwide.com/manual/dhc806/adv/en.html
E
n

Advertisement

loading

Summary of Contents for Integra DHC-80.6

  • Page 1 DHC-80.6 Basic Manual Advanced Manual found here http://integraworldwide.com/manual/dhc806/adv/en.html...
  • Page 2 Before Start About the Basic Manual Features Supplied Accessories This unit works as an AV controller when connected with a Supports playback in Dolby Atmos format which provides Indoor FM antenna --- (1) separately sold multichannel power amplifier. 360-degree placement and movement of sounds The Basic Manual leads you through the initial procedure including overhead sound to enjoy various sources with the AV controller, describing...
  • Page 3 Step 1: Connections Personal computer HDMI HDMI To use the ARC function, connect to the ARC HDMI cable compatible HDMI jack of the TV and make an appropriate setting on the unit. See "2nd Step : Source Connection" of "Step 2: Setting Up". HDMI HDMI HDMI...
  • Page 4 Step 1: Connections Use a component video cable to connect a TV The unit supports the HDMI Through function that allows Audio signal connection transmission from players to the TV even if the unit is in with component video input jacks and a player with Digital connection: Use a digital optical cable standby.
  • Page 5 Step 1: Connections Although Height 1 speakers can Using Dolby Enabled Speakers Connecting speakers enhance surround effects, we recommend you to add Height 2 speakers in order to ensure full effects. Speaker Layout Install Height speakers such as Front High and Rear High speakers on the upper part of the front or rear wall.
  • Page 6 Step 1: Connections Ceiling speakers, etc. are used for maximizing effects in Dolby Atmos or Dolby Surround listening mode. Install Top Front speakers midway between the position just above the listening position and the position just above the front speakers. Install Top Middle speakers just above the listening position.
  • Page 7 Step 1: Connections Connecting a Subwoofer with Built-in Power Amplifier The maximum four units of two systems of subwoofer with built-in power amplifier can be connected to this unit. Use the SW1/2 PRE OUT RCA jack or SUBWOOFER 1/2 PRE OUT XLR jack according to the input jack of your PUSH PUSH PUSH...
  • Page 8 Step 1: Connections Network Connection Other connections You can enjoy Internet radio and DLNA by connecting the unit to LAN. The unit can be connected to the router with an AM/FM Antenna Connections Ethernet cable. Connect the Ethernet cable to the Ethernet port.
  • Page 9 Step 2: Setting Up Important: When the unit is turned on for the first time, the You cannot return to the previous screen during speaker Making the Initial Setup with the Setup Wizard setup wizard of the section 2 will automatically be launched. setup, even if you press Return.
  • Page 10 Height 2 Speakers Type Not Use displayed, disconnect the microphone. Source Connection The following CEC-compatible devices are found; REAR PANEL Do you wish to turn on the CEC link? Integra DHS-8.8 2nd Step : Source Connection SURROUND WIDE BACK FRONT R FRONT L...
  • Page 11 Remote Mode button and in the keyboard screen, enter the first three characters of the brand name of the device you are going to program (e.g., "INT" for Integra) and search for the remote control code. The guidance will also explain how to set the remote controller.
  • Page 12 Step 3: Playing Back Remote Controller Parts Name Playing the player and TV zReceiver button: Turns the unit on or into standby mode. Remote Mode/Input Selector button: Switches the input to be played. Cursor buttons and Enter button: Moves the cursor and confirms the selection.
  • Page 13 Step 3: Playing Back Listening Modes "Bass": Allows you to enhance or moderate the low Listening to AM/FM Radio pitched range. "Treble": Allows you to enhance or moderate the high You can select a listening mode from various options such pitched range.
  • Page 14 Step 3: Playing Back Network Service: Select to use Internet radio services Using the Home menu Using Quick Setup menu and the DLNA function. When you connect the unit to the network and press Enter, the network service screen will be displayed on the TV.
  • Page 15 Step 3: Playing Back Subwoofer 1/2 Level, Center Level: Adjust the speaker This item may not be available depending on the level while listening to the sound. The adjustment you selected listening mode. made will be reset to the previous status when you turn This function cannot be used if headphones are the unit to standby mode.
  • Page 16 Step 3: Playing Back 3, any can be selected from among an external device Change the setting: Press Receiver and then Home on Using the multi-zone function connected to the analog audio input jacks ( ) of the unit, the remote controller, select "Setup" - "1. Input/Output the "NET"...
  • Page 17 Step 3: Playing Back Listening to Music in a Separate Room Performing Multi-zone Playback If Zone 2 or Zone 3 is on, power consumption during standby becomes larger than normal. While Zone 2 or Zone 3 is on, the RI linked system Press Zone on the remote controller a repeatedly to c.
  • Page 18 (Australian and Asian models) Front Panel zOn/Standby button: Turns the unit on or into standby Listening Mode buttons: Allows you to select the Return button: Returns the display to the previous state. mode. listening mode. Master Volume: Allows you to adjust the volume. Hybrid Standby indicator: Lights if the unit enters Dimmer button (North American model): Switches the Zone 2 button, Zone 3 button and Off button:...
  • Page 19 USB port: A USB storage device is connected so that music files stored in it can be played. AUX Input HDMI/MHL jacks: An HD video camera or MHL-enabled mobile device is connected. It is possible to send video and audio of an MHL-enabled mobile device.
  • Page 20 PUSH PUSH Rear Panel INPUT BALANCE L/R jacks: XLR-type balanced DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio ZONE 2 OUT V jack: Video signals of the player are signals are input. output to the connected TV in the separate room. input jacks. For monaural sources, connect the cable to RI REMOTE CONTROL jack: An Onkyo product with RI IR IN A/B, IR OUT jacks: Connected to the multiroom BALANCE L jack.
  • Page 21: Troubleshooting

    Troubleshooting HDMI control does not function correctly. Resetting the Unit Before starting the procedure Set the CEC link function of the unit to on. It is also Problems may be solved by simply turning the power Resetting the unit to the status at the time of shipment may necessary to make the HDMI linked system setting on on/off or disconnecting/connecting the power cord, solve the problem.
  • Page 22: Specifications

    Specifications Amplifier Section Network Section Digital THD+N (Total Harmonic Distortion+Noise) Ethernet LAN OPTICAL 1 (GAME), 2 (TV/CD), AUX INPUT DIGITAL (Front) 0.08% (20 Hz - 20 kHz, half power) 10BASE-T/100BASE-TX COAXIAL 1 (BD/DVD), 2 (CBL/SAT), 3 (STB/DVR) Input Sensitivity and Impedance (Unbalance) Analog General BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, PHONO,...
  • Page 23 License and Trademark Information DISCLAIMER Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, HDBaseT™ and the HDBaseT Alliance logo are trademarks of the HDBaseT Through this device you are able to link to other services or websites which Dolby Surround, Surround EX and the double-D symbol are trademarks of Alliance.
  • Page 24 Integra Division of Integra Division of Integra Division of 1301, 555 Tower, No.555 West NanJin Road, Jin an, Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650 Shanghai, OSAKA 541-0041, JAPAN http://www.integrahometheater.com...