Using Your Extractor - CDA CST Manual For Installation, Use And Maintenance

Using your Extractor

For best performance, you should switch on the extractor 15 minutes before starting to cook and leave it to run for approximately
15 minutes after the end of cooking.
Control Panel
A – Light switch
B – Power indicator
C – Power switch
A
A1 A2
Fig. 1
To switch the extractor light on or off
• Slide the light switch to position A1 for off, or A2 for on.
To switch on the extractor or change the motor speed at any time when the extractor is running
• Slide the power switch to the position required dependent on the speed you require.
To switch the extractor off
• Slide the power switch to position C1.
B C
C1 C3
C2 C4
3