Electrical Information
Mains electrical voltage: 230 – 240Vac.
Total rated power consumption: 153W.
Troubleshooting
Please note:
•
Your extractor is equipped with a motor protection device that will switch off the motor to prevent damage from overheating.
This may happen during cooking when most or all of the zones/burners are being used simultaneously. This is normal, and the
extractor will work again once the motor has cooled sufficiently, or if your extractor is installed lower than the recommended
height above the hob.
If your extractor is not working:
1. Check that the mains supply has not been switched off.
2. Check that the fuse in the spur has not blown.
Contact CDA Customer Care
A : Customer Care Department, The CDA Group Ltd, Harby Road, Langar, Nottinghamshire, NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu
7