Definition Of Controls - Telematrix 2 Line trimline User Manual

DEFINITION OF CONTROLS

1. Tone/Pulse Switch
Used to select touch-tone or rotary pulse dialing.
2. Redial key
Used to automatically re-dial the last number dial.
3. Flash Key
Provide a 600mS time line break.
4. Message Waiting Lamp
Visual indicator to tell you that a message is waiting
or that the line is ringing.
5. Hold Key
Used to place a caller on hold.
6. Line Selector Keys
Used to select Line1 or Line2 when placing or
answer a call
7. Line Status Indicator
LED indicators to show that the line is ringing,
in-use or on hold
8. Ringer Volume Control
Switch to adjust the loudness or the ringer.
9. Data Port
Used for plugging in a laptop, modem, fax, etc.
10. Line Reset Key
Used to reset the line to place another call.
11. Handset Volume Control
Amplifies the volume of the receiver.
12. Dialpad
Large keys used for outbound dialing.
13. Message waiting selector switch
Select optional 90VDC Neon or low voltage LED
message waiting.
5