Telematrix DECT MWD5 Programming & Installation Manual

Parts/Items Check List:

The following parts are included in this package:
A. (2) Line cords - 15 ft./4.5m. B. Battery for Handset C. Base unit D. Mobile Handset
E. Paper faceplate F. Protective plastic faceplate overlay G. Pass-Through Power Adaptor
The following are optional Items possibly included: (Must be ordered separately)
H. Charging Stations & Handset with Handset Battery and Power Adaptor.
Please call TeleMatrix to order : +1.719.638.8821 worldwide voice

Handset Battery...

Charging the Handset Battery: (On Base and Charging Station)
The handset Battery is a Ni-Cd battery. This battery requires a Full charge prior to use
to ensure long life. To charge the battery, complete the installation procedure by plugging
the power source into the wall outlet and the telephone base or charging station.
Install the battery the battery per below instructions, lining up (+) & (-) on battery to (+) &
(-) on battery compartment. Press into place, then replace cover and place handset into
base (face down) or charging station (either facing front or back).

Installing Battery Into Handset:

1. Open cover with small screwdriver.
Do Not open more than 1/2 inch.
2. Grip handset and depress cover at hinged end.
3. Slide cover off, exposing battery compartment.
4. Line up (+) & (-) on battery with (+) & (-) on inside
of battery compartment.
5. Slide battery into battery compartment. Do Not
Force Battery!
6. Press on back end of battery to snap into place.
7. Place hinged end of cover into slot, then press down
and snap into place.
V: 10.30.07
1.800.462.9446 domestic
+1.719.638.8821 international
www.telematrixusa.com