II.
OPERATINg OF COFFEE MAkER
PRePaRInG an esPResso By usInG PRe-set functIon
Disconnect the appliance from
mains supply. Fill the water tank
with water. Do not exceed MAX
position. Connect the appliance
to a suitable mains supply
outlet, The ON/OFF button
indication light stops flashing as
soon as required temperature
will be reached.
Remove the filter holder from
the appliance by turning from
right to left as it is shown on the
picture.Put the ground coffee
into the filter holder by using the
measuring spoon. Remove any
excess coffee on the edge of the
filter.
ENgLISh
Put the filter holder back by
turning from left firmly to right.
Place coffee cup(s) under the
filter holder on the cup reset
grille. Press pre-set Espresso
buttons to obtain the coffee.
25