Redmond RCM-1503 Instruction Manual page 30

CHANGE PRE-SET ESPRESSO QUANTITY
The appliance has been
factory programmed two
espresso quantities per
shot:
1-cup = 35 to 65 ml
2-cup = 95 to 125 ml
the programming can
be completed while an
espresso is being made.
follow the instruction 1-9
in "Preparing an espresso
by using pre-set function".
30
Press and hold the Espresso
Button (1-cup espresso or 2-cup
espresso depending on which
one is to be programmed) until
you obtain the desire espresso
quantity. The programming is
completed.
ENgLISh ENgLISh
NOTE:
The brewing time
for programming
should not less than 9
seconds; otherwise the
programming may not be
completed.