ENglIsh
• Switch on coffee maker, selecting water heating mode with mode regulator (5), with the
help of light indicator make sure that coffee maker is operating.
• Water will not start to fill the flask, some time should be used for heating water.
• When water will pass through the filter and fill the flask – switch off coffee maker, selecting
position "oFF" on mode regulator.
• Pour out water from flask.
• Repeat point from 7 to 11 2 more times as minimum.
• Wash all detachable parts in warm water.
• Dry all detachable parts of coffee maker.
II. opERatIoN oF thE CoFFEE makER
1.
2.
3.
10
pREpaRatIoN oF EspREsso
Plug the coffee maker to the stock. Mode
switcher (3) must be on oFF position.
attENtIoN! watCh that thE NEtwoRk CoRD
DID Not oVERhaNg FRom thE taBlE EDgE oR
thE woRkINg sURFaCE oN whICh thE DEVICE
Is EstaBlIshED.
Fill the coffee maker tank through an aperture
for налива waters (4).
Place the filter for coffee (10) in the holder of
the filter (11). Put in the filter (10) coffee. If
necessary remove surpluses of coffee from the
filter.