Redmond RCM-1503 Instruction Manual page 38

DE-SCALING
It is recommend de-scaling
the appliance every 3 months
by using citric acid. Dissolve 2
spoonfuls (about 30gram) of
citric acid in 1 liter of water.
Disconnect the
from mains supply. Make sure
the appliance has completely
been cooled down. Before
de-scaling, unscrew
percolation grid
percolation head by using a
suitable screw driver as it is
shown on the picture.
Clean the percolation grid and
percolation head of any tartar
and coffee ground residue.
Replace the valve spring and
38
appliance
gasket on the percolation
head and screw down firmly.
the
from the Remove
accessory from the steam
nozzle.
Fill the tank to MAX by using
dissolved 1 liter citric acid
solution. Close the lid of water
tank and refit the water tank to
the appliance.
Place one empty container
under the percolation head
and one under the steam
nozzle.
Connect the appliance to a
suitable mains supply outlet.
Press the Cappuccino Button,
the ON/OFF button indication
light flashes with a deep
sound.
the cappuccino
The ON/OFF button indication
light stops flashing as soon as
the appliance has reached the
required temperature.
Press
button (3) until half of the
de-scaling solution has ran
ENgLISh ENgLISh
manual espresso