Operating Instructions - Elba ESF-B1634TM Owner's Manual

7. Press the rim of the front guard to attach with rear guard until both guards are
properly fitted (Fig 4). Secure both guards firmly by tightening the clip (Fig 5).

OPERATING INSTRUCTIONS

1. Operate the relevant push button for the required fan speed. '0' for 'OFF', '1' for
Low Speed, '2' for Medium Speed and '3' for High Speed.
2. To make the fan head oscillate, push the oscillating knob DOWN. To stop the
oscillation, pull the oscillating knob UP.
WARNING: Do not adjust the oscillating angle by hand. It will damage the
synchronous motor.
3. To adjust the tilt of the fan head, firstly fix the body with one hand and then push
the motor part up or down to adjust it to the appropriate position.
WARNING: The fan should be switched off when making this adjustment.
NOTE: The fan head will not latch into the low or mid position until the guard and
blade are fitted to the motor.
(Fig 4) (Fig 5)