Advertisement
Quick Links
STAND FAN
MODEL: ESF-A1632D(BL)
ESF-A1632D(PK)
Owner's Manual
Please read this manual carefully before
operating your set.
Retain it for future reference.
Record model number and serial number
of the set.
See the label attached on the set and
quote this information to your dealer
when you require service.
For The Warranty Terms & Conditions, Please Refer To Warranty Certificate
Advertisement
Related Manuals for Elba ESF-A1632D(BL)
Summary of Contents for Elba ESF-A1632D(BL)
-
Page 1: Stand Fan
STAND FAN MODEL: ESF-A1632D(BL) ESF-A1632D(PK) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service. -
Page 2: Safety Precautions
REMOVE ALL PACKING MATERIALS FROM THIS PRODUCT BEFORE USING IT. THIS APPLIANCE MUST BE INSTALLED ON A FLAT SURFACE. PLEASE ENSURE THE ELECTRIC SUPPLY TO THIS APPLIANCE IS DISCONNECTED BEFORE INSTALLING. Please read this instruction carefully. It is advisable to keep this instruction manual in a safe place for future reference. - Page 3 ASSEMBLY INSTRUCTIONS 1. Attach the column to the stand with the 4 screws as shown. 2. Loosen and take off the height adjustment nut. 3. Slide the stand cover down the column to rest on the stand. 4. Pull out the extension tube to a required height and tighten the height adjustment nut.
-
Page 4: Product Descriptions
PRODUCT DESCRIPTIONS 1. Front guard 2. Guard locking screw/nut 3. Guard loop 4. Blade retaining nut 5. Blade 6. Guard retaining nut 7. Rear guard 8. Motor housing 9. Oscillating knob 10. Control panel 11. Handle 12. Height adjustment nut 13. -
Page 5: Cleaning And Maintenance
CLEANING AND MAINTENANCE Clean the appliance with a damp cloth with mild cleaner. Do not use chemical, steel, wooden or abrasive cleaners to clean the appliance. WARNING: DO NOT IMMERSE THE APPLIANCE INTO WATER. ENSURE THAT THE FAN IS UNPLUGGED FROM THE POWER SUPPLY BEFORE REMOVING THE GUARD. MAIN SPECIFICATION: Voltage : 220-240V/50Hz...