Product Descriptions; Operating Instructions - Elba TF-1681 Owner's Manual

OPERATING INSTRUCTIONS

1. Operate the relevant push button for the required fan speed. '0' for 'OFF', '1' for
Low Speed, '2' for Medium Speed and '3' for High Speed.
2. To make the fan head oscillate, push the oscillating knob DOWN. To stop the
oscillation, pull the oscillating knob UP.
WARNING: Do not adjust the oscillating angle by hand. It will damage the
synchronous motor.
3. To adjust the tilt of the fan head, loosen the tilt adjusting screw and move to the
desired angle, then firmly tighten the tilt adjusting screw.
WARNING: The fan should be switched off when making this adjustment.
NOTE: The fan head will not latch into the low or mid position until the guard and
blade are fitted to the motor.

PRODUCT DESCRIPTIONS

Front Guard
3-Speed Push Button
Control
Oscillating Knob
Blade Assembly
Fan Base