STAND FAN MODEL: ESF-B1634TM(GR) ESF-B1634TM(MR) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service.
REMOVE ALL PACKING MATERIALS FROM THIS PRODUCT BEFORE USING IT. THIS APPLIANCE MUST BE INSTALLED ON A FLAT SURFACE. PLEASE ENSURE THE ELECTRIC SUPPLY TO THIS APPLIANCE IS DISCONNECTED BEFORE INSTALLING. Please read this instruction carefully. It is advisable to keep this instruction manual in a safe place for future reference.
ASSEMBLY INSTRUCTIONS 1. Assemble the base to the support pole using the fastener provided. (Fig 1) (Fig 1 – Base assembly) 2. Loosen the height adjustment ring and extend the support pole. Initially the support pole will be held tightly in place. If necessary, use a pair of pliers to grasp the support pole and pull it into position.
7. Press the rim of the front guard to attach with rear guard until both guards are properly fitted (Fig 4). Secure both guards firmly by tightening the clip (Fig 5). (Fig 4) (Fig 5) OPERATING INSTRUCTIONS 1. Operate the relevant push button for the required fan speed. ‘0’ for ‘OFF’, ‘1’ for Low Speed, ‘2’...
CLEANING AND MAINTENANCE Clean the appliance with a damp cloth with mild cleaner. Do not use chemical, steel, wooden or abrasive cleaners to clean the appliance. WARNING: DO NOT IMMERSE THE APPLIANCE INTO WATER. ENSURE THAT THE FAN IS UNPLUGGED FROM THE POWER SUPPLY BEFORE REMOVING THE GUARD.