Button Functions; Power; Direct Play; Open/Close - Hyundai H-DVD5041-N Instruction Manual

Operation

Button functions

POWER

When playing, press POWER button on
the panel or on the RC to turn off the unit, and
standby mode will be activated; Press the button
again, to turn on the unit and it will start playing.
The power is not fully turned off in
standby state. If the unit will not be used for a
long time, turn off the power fully by pressing
power switch on the back panel.

DIRECT PLAY

If a DVD disc contains a warning or notice
message or an advertisement clip, press this
button to skip them and go directly to the disc
contents.

OPEN/CLOSE

Press OPEN/CLOSE button on the RC or
OPEN button on the panel when power is on,
the disc tray is pushed out. Put the disc on the
tray with the title faced up. Press the button
again to close the disc tray and the unit starts
playing automatically.

Number buttons

Press number buttons to input digits and
numbers (e.g. track/chapter number, playback
time etc.).

TIME

Press TIME button to input chapter/title
number or disc time. Playback will start in
accordance with the input data.

DISPLAY

Press DISPLAY button to display various
info on the current playback: title/chapter time
elapsed/remaining, etc.

ZOOM

When playing DVD, SVCD, VCD disc, press
ZOOM button to zoom in the picture as follows:
2x => 3x => 4x => normal. In zoom in mode,
press cursor buttons to move the picture for
8
viewing.
A - B
• Press A-B button at the start point (A)
and the ending point (B) to select the repeat
fragment.
• Press A-B button the third time to cancel
fragment repeat and return to normal play.

REPEAT

Press REPEAT button to repeat a title,
chapter, track or the whole disc.
• When playing DVD disc, press REPEAT
button continually to repeat chapter => title =>
all => repeat off.
• When playing SVCD, VCD, CD disc, press
REPEAT button continually to repeat track =>
all => repeat off.
• When playing MP3 disc, press REPEAT
button continually to play single => repeat track
=> repeat all => repeat off.

TITLE

When playing a DVD disc, press TITLE button
to return to the main title menu of the disc.

STEP

When playing DVD, SVCD, VCD disc, press
STEP repeatedly to play video frame by frame.
Press PLAY button to resume normal playback.

SLOW

Press SLOW button repeatedly to change
slow playback speed as follows: X2 => X4 =>
X8 => X16 => normal.

N/P

Press N/P button to select between PAL/
Auto/NTSC video mode. This function is only
available when no disc is inside the unit.

SUBTITLE

When playing a disc with multi-language
subtitle, press SUBTITLE button continually,
the subtitle languages are changed in a circle,
and you can select the needed one.