Connection; Video/Audio System Connection - Hyundai H-DVD5041-N Instruction Manual

Video/audio system connection

Before you start connection of external
devices, ensure that power of the unit is
switched off.
Following outputs are available in this unit.
Composite video
Use the cable with yellow plug of an AV
cable to connect the composite video output of
this unit to the video input of a TV/monitor.
SCART
Use a 21-pin SCART cable to connect the
SCART output of this unit to the TV/monitor
SCART input.
Stereo audio
Use a pair of AV cables (red for right/white
for left) to connect the stereo audio outputs of
this unit to the TV or a stereo input of power
amplifier.
Coaxial digital audio
Use a special coaxial cable to connect the
coaxial output of this unit to the coaxial input of
an external device (e.g. amplifier with in-built
DTS-decoder).
• The connection you should make
depends on the TV/monitor input terminals.
Don't make all the connections at the same time;
otherwise the produced picture will be affected.
• The physical connection should accord to
the audio output setup of this unit.
• The unit does not support DTS sound
output. To obtain DTS format sound you need
to connect the unit to an external amplifier with
the help of a coaxial cable (not included).

Connection

5