Audio; Lt/Rt; Menu; Cursor Buttons - Hyundai H-DVD5041-N Instruction Manual

AUDIO

When playing DVD with more than one audio
stream, press this button to select the needed
language.

LT/RT

Press this button to select the audio channel
when a disc is played.

MENU

• When playing DVD disc, press MENU button
once to return to the main menu of the disc.
• When playing SVCD, VCD2.0, after the
disc is loaded, the unit will display the chapter
menu (if PBC is on). Also, you can display this
menu by pressing MENU button.

Cursor buttons

Press cursor buttons to navigate in various
menus.

ENTER

Press ENTER button for confirmation of
chosen options.

SETUP

Press SETUP button to enter or exit the
system setup menu.

PBC

Press this button to turn on or off Playback
Control (PBC) function.

PROG

• If the disc contains 2 or more tracks,
chapters or titles, set up the playing order to
your preference. Press PROG button to enter
program menu.
• Press number buttons to input the number
of the track, title or chapter. If programmed
tracks are over ten, select NEXT item and
press ENTER button to go on programming.
Maximum 20 programmable items are
possible. Use cursor buttons to move the
cursor to START item. Press ENTER button to
start program playback. Press PROG button to
cancel programming.
For MP3 disc, this function is not
available.

ANGLE

When playing the disc with multi-angle,
press ANGLE button to select the view angle.

REV

Press this button for quick rewind search.
Search speed will increase with each pressing:
2X => 4X => 8X => 16X => 32X => normal.

FWD

Press this button for quick forward search.
Search speed will increase with each pressing:
2X => 4X => 8X => 16X => 32X => normal.

PREV/NEXT

• When playing DVD disc, press PREV
button to go to the previous chapter.
• When playing SVCD, VCD, CD disc, press
PREV button to go to the previous track.
• When playing DVD disc, press NEXT
button to go to the next chapter.
• When playing SVCD, VCD, CD disc, press
NEXT button to go to the next track.

PLAY

When the disc is paused or stopped, press
PLAY button on the RC or PLAY/PAUSE button
on the panel to start playback.

PAUSE

When playing the disc, press PAUSE button
on the RC or PLAY/PAUSE button on the unit
to pause playback.

STOP

When playing DVD, SVCD, VCD, CD disc,
press STOP once, the unit will memorize the
previous ending point; when afterwards you
play the same disc, playback will start from
the memorized point. Press STOP button two
times, playback will stop without memorizing
the stop point.
This function is only active when ON is
Operation
9