Shifting Gears - Victory Cross Roads Owner's Manual

Shifting Gears

WARNING! Forced shifting (with clutch engaged) could cause damage to the engine, transmission
and drive train. Such damage could cause loss of control, which could result in serious injury or death.
Always pull the clutch lever fully toward the handlebars to disengage the clutch before shifting gears.
This motorcycle is equipped with a
six-speed transmission. The sixth gear
is overdrive. Neutral is located
between first and second gear.
Tip: The transmission is in neutral if you
can move the motorcycle forward or
rearward freely without disengaging
the clutch. If the ignition switch is in the
ON position, the neutral indicator illu-
minates when the transmission is in
neutral.
1. Start the engine. See page 46.
2. With the engine at idle speed, apply the front brakes.
3. Disengage the clutch (pull the clutch lever fully toward the handlebar).
4. Push the shift pedal downward until you feel it stop in first gear.
Tip: Shift to a higher gear by lifting the front of the gear shift pedal with your toe. Shift to a lower gear by
pressing the pedal downward.
5. Release the brake lever.
6. Simultaneously release the clutch lever while opening the throttle (rolling the throttle
control grip rearward) in one smooth motion. As the clutch begins to engage, the motor-
cycle will move forward.
7. To shift to a higher gear, accelerate smoothly to the recommended shift point. See page
48. With a quick motion, simultaneously close the throttle completely and disengage the
clutch. Raise the shift pedal until you feel it stop at the next gear. Simultaneously release
the clutch lever and open the throttle in one smooth motion.
5
4
3
Neutral
2
N
1
Operation
Overdrive
O/D (6th Gear)
47