Victory Cross Roads Owner's Manual page 25

Instruments, Features and Controls
Instrument Cluster (CROSS ROADS)
Multi-Function Display
Use the mode button to toggle through the
modes of the multi-function display. See
page 29. Press and hold the mode button
to reset the trip odometers, average fuel
economy, average speed and trip hour
meter.
Modes Available
Standard Modes Optional Modes
Odometer Trip Odometer 2
Trip Odometer 1 Average Fuel Economy
Clock Instantaneous Fuel Economy
Gear Indicator Trip Time
Fuel Level Gauge Average Speed
Engine Speed DC Voltage
Ambient Air Temperature
Odometer
The odometer displays total distance traveled.
Trip Odometers
The ignition switch must be in the ON or PARK position to access the trip odometers. The
trip odometers (Trip 1 and Trip 2) display total distance traveled since being reset. To reset a
trip odometer, toggle to the trip odometer, then press and hold the mode button until the trip
odometer resets to zero.
Fuel Level
Fuel Level FULL
The fuel level displays bar graph-
ics between empty (E) and full (F)
to indicate the fuel level.
Engine Speed
Engine speed displays in revolutions per minute (RPM).
DC Voltage (Optional)
The volt meter displays battery voltage. If the engine is not running, approximate battery
voltage displays. If the engine is running, approximate charging voltage displays.
Gear Position
Gear position displays only when the vehicle is moving and the clutch is engaged. If the
vehicle stops moving, or if the clutch is disengaged, "--" will show in the display.
Temperature (Optional)
The key must be in the ON or PARK position to display ambient air temperature.
21