Victory Cross Roads Owner's Manual page 92

Maintenance
Troubleshooting
Shifting Difficulties or Hard to Find Neutral
Possible Cause
Shift Linkage Bushings Dry Or Worn
Engine Oil Level Incorrect Or Wrong Type
Clutch Damage
Battery Charging Rate Low or Battery Discharges
Possible Cause
Loose/Corroded Charging Circuit
Connection
Accessory Load Exceeds Charge Rate
Improperly Wired Accessory (Current Draw)
Battery discharges when motorcycle not in
use.
Brake Noise / Poor Brake Performance
Tip: Contact a VICTORY dealer if brake performance does not return after these inspections.
Possible Cause
Dust / Dirt On Brake Disc(s)
Worn Pads Or Disc / Brake Disc Damage
Brake Fluid Level Low Or Fluid Contaminated
Anti-Lock Brake Light Remains Illuminated or Illuminates Intermittently
Possible Cause
Blown fuse
Loose or damaged pulse ring
Debris lodged in components
Damage caused by debris
Damaged components
Service Manual Availability
Some procedures are beyond the scope of this manual. See your dealer to purchase a VIC-
TORY Service Manual for your motorcycle.
Some procedures provided in the Service Manual require specialized knowledge, equipment,
and training. Be sure you have the required technical skills and tools that are needed before
you attempt ANY service on your motorcycle. Please contact your VICTORY dealer before
attempting any service work that is beyond your level of technical knowledge or experience,
or if the work requires specialized equipment.
88
Possible Remedy/Action
Lubricate shift linkage.
Inspect level and quality of oil. See page 38.
Replace clutch.
Possible Remedy/Action
Check/clean battery cable connections. Check/clean
charging circuit connections. See dealer.
Limit accessory operation when the engine is off.
See dealer to check charging system output and cur-
rent draw.
See dealer to check key OFF current draw.
Possible Remedy/Action
Clean disc. See page 74.
Inspect pads. See pages 41 and 74.
Inspect fluid level / fluid. See pages 39 and 40.
Possible Remedy/Action
Check the fuses. See page 84.
Inspect pulse ring for looseness or chipped teeth.
Inspect wheel speed sensor and pulse ring for debris.
Inspect wheel speed sensor for cracked housing.
See service manual or authorized dealer.