Polaris Victory Cross Roads Owner's Manual Page 27

Polaris victory motorcycles 2012 rider's manual.
Hide thumbs
Instrument Cluster (CROSS ROADS)
Multi-Function Display
Engine Error Codes
The error screen displays only when the
CHECK ENGINE light is on or when it goes
on and off during one ignition cycle. Error
codes are not stored. When the key is turned
OFF, the code and message is lost, but will
reappear if the fault reoccurs after restarting
the engine.
If the CHECK ENGINE indicator lamp illu-
minates, retrieve the error codes from the
display.
1. If the error codes are not displayed, use
the mode button to toggle until "Ck
ENG" displays on the main line of the
display.
2. Press and hold the mode button to enter the diagnostics code menu.
3. Record the three numbers displayed in the gear position, clock and odometer displays.
4. See an authorized VICTORY dealer for code details and diagnosis.
Low Oil Pressure Display
"LO OIL" displays under the following
conditions.
Condition
Engine oil pressure has
dropped while the
engine is running.
The key is turned to ON
or PARK.
The stop/run switch is
moved to STOP.
Instruments, Features and Controls
Indicates
Oil pressure is below a
safe operating pressure.
The indicator circuit is
operating properly.
The system is operating
properly.
Error Code
Number (0-9)
Failure Mode Indicator (FMI)
Action Required
Stop the engine as soon as safely possible and
check the oil level. If the oil level is sufficient,
but "LO OIL" continues to display after restart-
ing the engine, stop the engine immediately.
None - After two seconds the display will return
to the most recently active menu.
Press and release the MODE button to return
to the most recently active menu.
Suspect Parameter
Number (SPN)
23

   Related Manuals for Polaris Victory Cross Roads

Comments to this Manuals

Symbols: 0
Latest comments: