Preparation - Beem G-1030ST-E-CERAMIC Instruction Manual

Steam generator power generator evo3 pro-c
Table of Contents

Advertisement

Available languages

Available languages

Steam
quantity
adjustment
(on the iron
station)
Iron dry (steam
ironing not
possible)
NOTE: Please bear in mind that the utensil needs some time to cool down when
you reduce the temperature setting.
First check whether the item of clothing has a label with ironing instructions. (The
ironing instructions are on a label with an iron symbol. The number of dots indicates
the correct temperature.) Always observe the instructions on the label and in the
settings table.
If the item of clothing has no label but you are familiar with the material, observe the
table above. The table refers to the basic material and not to any coatings or gloss
applications.
Textiles with special surfaces (smooth, creased, etc.) should be ironed at low
temperatures.
If an item of clothing is made from different materials, always choose the lowest
specified ironing temperature. An item of clothing with 60% polyester and 40% linen
should be ironed at the temperature for polyester and without steam.
Sort the materials according to the ironing temperatures. Wool to wool, cotton to
cotton, etc. The iron heats up quicker than it cools down. Therefore you should iron
materials with lower ironing temperatures first. Then iron the materials with higher
ironing temperatures.
6.1

Preparation

1. Make sure the mains plug is removed.
2. Place the steam generator where you want to use it.
3. Press up the release knob in the recessed handle of the water tank and pull the water
tank out of its rest.
4. Take the filter cartridge out of the tank opening.
BEEM – Elements of Lifestyle
Temperature
adjustment
(on the iron)
Synthetic
Wool/Silk
Cotton/Linen
MAX
Textile / Fabric
Synthetic
fibre
Acetate
Nylon
(polyamide)
Acrylic
Acetate
(artificial silk)
Viscose
Silk
Rayon
(polyester)
Wool
Silk
Cotton
Linen
Ramie
Cotton
Linen
Ramie
Recommendations
Iron off
Iron dry and preferably
inside out.
Place a cloth over the
material when ironing
and preferably iron
inside out.
Iron whilst still slightly
damp.
Generally insensitive
and ideally suited to
steam ironing.
20/56

Advertisement

Table of Contents
loading

This manual is also suitable for:

Power generator evo3 pro-c

Table of Contents