Related Manuals for American Fibertek MTX-8229C
Summary of Contents for American Fibertek MTX-8229C
- Page 1 Instruction Manual MTX-8229C MRX-8229C Two Channel Video Multiplexer with Return AD/Bosch Manchester Code and Bi-directional Contact Closure © Copyright 2005, American Fibertek, Inc. 1228JD...
- Page 2 Table of Contents Functional Description ................3 Installation...................3 Power Source ..................4 Power Connection................4 Fiber Connection.................4 Video Input / Output Connections ............4 Data Configuration ................4 Data Connections and Terminations...........5 MTX-8229C Status LED Indicators .............6 MRX-8229C Status LED Indicators.............7 Warranty / Service Information ............8...
- Page 3 THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO THE NATIONAL ELECTRICAL CODE, ANSI/NFPA 70 AND LOCAL CODES. To install the MTX-8229C or MRX-8229C it is first necessary to mount the rack flanges to the unit. For rack mounting the ears are installed on the...
- Page 4 For mounting the unit flush to a wall or other rigid surface, the ears may be installed on the sides with the oval holes flush with the bottom of the unit as in Figure 2. Mount the ears with the #10 flathead screws provided.
- Page 5 120 ohm termination at the copper device which is terminating the MTX-8229C data output signal. If the MTX-8229C data output signal is daisy chained to more than one device, only the last device in the chain should be terminated.
- Page 6 These indicators turn green when any data activity is present. An active DATA 1 RX LED indicates Manchester data is present at the output terminals of the MTX-8229C. The intensity of this indicator will vary depending on the data pattern sent to the unit. When configured for contact closure, the DATA 2 TX and RX LEDs will be off to indicate contact open and on to indicate contact closed.
- Page 7 These indicators turn green when any data activity is present. An active DATA 1 TX LED indicates Manchester data is present at the input terminals of the MTX-8229C. The intensity of this indicator will vary depending on the data pattern sent to the unit. When configured for contact closure, the DATA 2 TX and RX LEDs will be off to indicate contact open and on to indicate contact closed.
- Page 8 LIFETIME WARRANTY INFORMATION American Fibertek, Inc warrants that at the time of delivery the products delivered will be free of defects in materials and workmanship. Defective products will be repaired or replaced at the exclusive option of American Fibertek. A Return Material Authorization (RMA) number is required to send the products back in case of return.
Need help?
Do you have a question about the MTX-8229C and is the answer not in the manual?
Questions and answers