12. SERVICE AND CALIBRATION
12. SERVICE AND CALIBRATION
12.1 Service S/W
12.1.1 Overview
This service S/W is used for Calibration and Standalone test.
12.1.2 Hardware and Software Environment
• More than 486 computer
• 16Mbyte RAM
• Remained more than 10Mbyte in Hard Disk Memory
• Under Microsoft window 98 or more than
12.1.3 Software Installation
Unzip the phones service software provided where slide you want there are some files extracted in
that slide. Start Setup.exe in Service software setup slide. RampTable.dat, default transmit ramping
table, and rf_original_F1200.epm, default calibration data, are located in window system slide so
that these files are loaded automatically, if you execute LaputaService.exe.
12.1.4 Common Properties of Service Software
When you execute this program, you'll see the below user interface window titled LAPUTA_Service
Tool. The LAPUTA_Service Tool has five main frames.
- 118 -