Service And Calibration; Service S/W - LG G5500 Manual

7. SERVICE AND CALIBRATION

7.1 Service S/W

7.1.1 Overview
This service S/W is used for Calibration and Standalone test.
7.1.2 Hardware and Software Environment
• More than 486 computer
• 16Mbyte RAM
• Remained more than 10Mbyte in Hard Disk Memory
• Under Microsoft window 98 or more than
7.1.3 Software Installation
Unzip the phones service software provided where slide you want there are some files extracted in that
slide. Start Setup.exe in Service software setup slide. RampTable.dat, default transmit ramping table,
and rf_original_L300.epm, default calibration data, are located in window system slide so that these files
are loaded automatically, if you execute LaputaService.exe.
7.1.4 Common Properties of Service Software
When you execute this program, you'll see the below user interface window titled
LAPUTA_Service Tool in figure 7-1. The LAPUTA_Service Tool has five main frames.
-122-