Aerial Connections - AEG DVD 4606 HC Instruction Manual & Guarantee

In some buildings or under certain circumstances it may
be diffi cult to receive radio signals. The supplied aerials
improve the reception of such signals. These are only
intended for internal use.
AM Loop Aerial
The AM loop aerial should be aligned until good
reception is achieved. The aerial should be placed as
far as possible from the DVD receiver, television set,
loudspeakers and power cables. If reception is still poor,
an external aerial may be necessary.
Connecting an AM Loop Aerial
1. Keep the lug pressed down.
2. Insert the end of the cable into the hole.
3. Release the lug.
4. Line up of the aerial.
5....-05-DVD4606_GB 43

AERIAL CONNECTIONS

FM Room Aerial
Line up the FM aerial in such a way that good reception
is obtained. The ends of the aerial must be fi xed in place
such that they are bent as little as possible.
Connecting the FM Room Aerial
1. Insert the FM room aerial into the 75 ohm connection
of the device.
If you are using your standard outside aerial, please
connect this to the 75 ohm connection of the device.
The required cable can be attained from the appropriate
shops.
43
09.07.2004, 10:02:49 Uhr