Using Bbe Sound; Adjusting Bbe Sound Level; Adjusting Loudness; Using Sound Field Control And Bbe Sound - Pioneer FH-P9200MP Operation Manual

Section
11 Audio Adjustments
50801252003155008001.25k
2k3.15k5k8k12.5k (Hz)
4 Press a or b to adjust the level of the
equalizer band.
Each press of a or b increases or decreases
the level of the equalization band.
+6  6 is displayed as the level is increased
or decreased.
# You can then select another band and adjust
the level.
5 Press BAND to cancel the 13-band gra-
phice qualizer mode.

Using BBE sound

With BBE, playback very close to the original
sound can be obtained by correction with a
combination of phase compensation and
high-range boost for the delay of the high-fre-
quency components and the amplitude devia-
tion occurring during playback. This function
makes it possible to reproduce the dynamic
sound field as if you are listening to a live per-
formance.
Note
Manufactured under license from BBE Sound,
Inc. The mark BBE is a trademark of BBE Sound,
Inc.

Adjusting BBE sound level

With BBE sound processing technology, you
can adjust the level of BBE.
1 Press AUDIO and NEXT and then press
BBE to select BBE.
2 Press BBE to turn BBE on.
# To cancel the BBE, press BBE again.
52
En
3 Press a or b to adjust the level of BBE.
Each press of a or b increases or decreases
the level of BBE.
+4  4 is displayed as the level is increased
or decreased.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press AUDIO and then press NEXT to
display LOUD.
Press NEXT until LOUD appears.
2 Press LOUD to select the loudness
mode.
3 Press LOUD to turn loudness on.
Loudness ON appears in the display.
# To turn loudness off, press LOUD again.
Using sound field control
and BBE sound
SFC (sound field control) incorporate four pro-
grams for reproducing typical sound fields of
a studio, club, concert hall or dome. This func-
tion makes it possible to reproduce the realis-
tic sound fields of the four programs in your
car.
With BBE, playback very close to the original
sound can be obtained by correction with a
combination of phase compensation and
high-range boost for the delay of the high-fre-
quency components and the amplitude devia-
tion occurring during playback. This function
makes it possible to reproduce the dynamic
sound field as if you are listening to a live per-
formance.