Introduction Of Advanced Built-In Cd Player Operation; Repeating Play; Playing Tracks In A Random Order; Scanning Tracks Of A Cd - Pioneer FH-P9200MP Operation Manual

Section
05 Built-in CD Player
Introduction of advanced
built-in CD player operation
The built-in CD player function menu has the
following functions:
RPT (repeat play)RDM (random play)
SCAN (scan play)T.LIST (track title list)
PAUSE (pause)TTLin (disc title input)
R.SRCH (search method)T.READ (tag dis-
play)
Notes
! If you do not operate the function within about
30 seconds, the display is automatically re-
turned.
(When you select the disc title input mode
(TTLin), the display is not returned automati-
cally.)
! T.LIST is displayed only when playing a CD
TEXT disc.

Repeating play

Repeat play lets you hear the same track over
again.
1 Press FUNC to select the repeat mode.
2 Press RPT to turn the repeat play on.
The light illuminates. The track currently play-
ing will play and then repeat.
# To turn repeat play off, press RPT again.
Notes
! If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
! When the repeat mode is exited while repeat
play is on, T.RPT appears on the basic dis-
play.
20
En
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNC and then press RDM to se-
lect the random mode.
2 Press RDM to turn random play on.
The light illuminates. Tracks will play in a ran-
dom order.
# To turn random play off, press RDM again.
Note
When the random mode is exited while random
play is on, RDM appears on the basic display.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNC and then press SCAN to se-
lect the scan mode.
2 Press SCAN to turn scan play on.
The light illuminates. The first 10 seconds of
each track is played.
3 When you find the desired track press
SCAN to turn scan play off.
The light goes off. The track will continue to
play.
# If the scan mode is automatically canceled,
select the scan mode again.
Notes
! After scanning of a CD is finished, normal
playback of the tracks will begin again.
! When the scan mode is exited while scan play
is on, SCAN appears on the basic display.