Mp3/Wma Player; Playing A Mp3/Wma - Pioneer FH-P9200MP Operation Manual

MP3/WMA Player

Playing a MP3/WMA

1
These are the basic steps necessary to play an
MP3/WMA with your built-in CD player. More
advanced MP3/WMA operation is explained
starting on the next page.
WARNING
Do not use with the front panel left open, after
ejecting a CD-ROM. If you do leave it open, it may
result in injury in the event of an accident.
1 MP3/WMA indicator
Shows when the MP3/WMA file is playing.
2 Folder number indicator
Shows the folder number currently playing.
3 Track number indicator
Shows the track (file) currently playing.
4 Bit rate indicator
5 Play time indicator
Shows the elapsed playing time of the cur-
rent track (file).
1 Press CD EJECT.
CD loading slot appears.
# After a CD-ROM has been inserted, rotate
SOURCE to select the built-in CD player.
2 3 4
5
FORM1
2 Insert a CD-ROM into the CD loading
slot.
Front panel is closed automatically, and play-
back will start.
CD loading slot
# You can eject a CD-ROM by pressing
CD EJECT.
3 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
4 Press a or b to select a folder.
# You cannot select a folder that does not have
an MP3/WMA file recorded in it.
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
5 To perform fast forward or reverse,
press and hold c or d.
# This is fast forward and reverse operation only
for the file being played. This operation is can-
celed when the previous or next file is reached.
# If you select the search method to
Rough search, pressing and holding c or d en-
ables you to search every ten track in the current
folder. (Refer to Selecting the search method on
page 26.)
6 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Section
06
23
En