Adjusting Fit; Making/Answering/Ending Calls; Multi-Shift Pairing - Avaya SupraElite Wireless User Manual

Adjusting Fit

1. Adjust headband to fit.
2. Rotate noise-canceling microphone until it is pointed towards your chin.

Multi-shift Pairing

1
Enable
Disable
1. To pair another headset to the same base, you must first enable the multi-shift
pairing feature. Long press (5 sec.) the speaking volume minor adjust up button on
back of base until the power indicator flashes.
2. Place a charged headset in charging cradle. The red indicator light on base will
flash for 2 seconds if the multi-shift pairing feature is enabled. Within 10 seconds of
+
doing so, press either the " " or "
green talk indicator lights to indicate pairing mode, and goes out after successful
pairing. Repeat steps 1 and 2 if headset and base do not link when call control but-
ton is pressed.
NOTE: Only the last paired headset will work with the base. You must NOT be in talk mode
(on a call) to enable or disable this feature.
To disable the multi-shift pairing feature, long press (5 sec.) the speaking volume
minor adjust down button until the power indicator light flashes.
12
NOTE: Depending on your preference,
you can replace the pre-installed
leatherette ear cushions with the
included alternative foam cushions.
2
OR OR OR
-
" listening volume button for 3 seconds until the

Making/Answering/Ending Calls

Setup 1, 2, 3 & 4
To make a call, press call control button. Dial tone should sound through handset
(If not, check compatibility—see Setup 1, 2, 3 & 4). Dial using the telephone keypad.
To answer a call, press the call control button on the headset.
To end a call, press the call control button on the headset. If either you or the recipient
have trouble hearing, please check compatibility (Setup 1, 2, 3 & 4).
13