Table of Contents
Advertisement
UNPACKING cont.
PARTS LIST (Fig. 1)
2. Dust Bag Assembly
(comes attached to sander)
3. Vac Adapter
DESCRIPTION
KNOW YOUR PAD SANDER (Fig. 2)
NOTE: Before attempting to use your sander, familiarize yourself with all of the
operating features and safety requirements.
Your 1/3-sheet pad sander has a precision-built electric motor and it should be connected
to a 120-volt, 60-Hz AC ONLY power supply (normal household current). DO NOT operate
on direct current (DC). The large voltage drop will cause a loss of power and the motor
will overheat. If the sander does not operate when plugged into correct 120-volt, 60-Hz
AC ONLY outlet, check the power supply. This sander has a 8-ft., 2-wire power cord
(no adapter needed).
This Pad Sander has the following features:
1. Powerful 2.0 amp motor provides the torque, power and durability for a variety of
continuous sanding applications.
2. 12,000 orbits per minute with 1/16-in. orbit diameter matched with the correct
sandpaper grit for the surface being sanded provides fast material removal and/or a
fine, smooth finish.
3. Ergonomically designed rear handle and front assist handle with molded-in
comfort grip for maximum balance, control and gripping comfort.
4. Precision-tuned counterbalanced system reduces vibration for smooth operation
and less operator fatigue.
1. Sander
4. Three Sanding Sheets
11
5. Paper Punch Template
6. Storage/Carrying Case
7. Operator's Manual
Advertisement
Table of Contents
