Table of Contents
Advertisement
OPERATION
Before attempting to use any tool, be sure to familiarize yourself with all the
operating features and safety instructions.
WARNING:
!
SANDER UNTIL THE MISSING PARTS ARE REPLACED. FAILURE TO FOLLOW
THIS RULE COULD RESULT IN SERIOUS PERSONAL INJURY.
WARNING:
!
Remember that a careless fraction of a second is sufficient to cause severe injury.
ON/OFF SLIDE SWITCH
This switch is conveniently located on the top, front of the rear handle.
Start the sander by sliding the switch forward to the On position and letting the
motor build to its maximum speed before starting sanding operation.
APPLICATIONS
Only use your sander for the applications listed below.
• Sanding wood surfaces with various grits of sandpaper.
• Removing rust from steel surfaces with special sandpaper.
CAUTION:
!
WARNING:
!
Fig 8
IF ANY PARTS ARE MISSING, DO NOT OPERATE YOUR
DO NOT let familiarity with your sander make you careless.
ALWAYS be careful not to let your hand cover the air vents.
Unsecured work could be thrown towards the operator causing injury.
19
Advertisement
Table of Contents
