Daewoo KOC-1C0KB Service Manual page 23

12. TO REMOVE STIRRER FAN
1) Remove a screw to the cover wave guide.
2)Push the fixture supporter in top plate.
3) Remove a holder stirrer from the stirrer motor.
4) Rotate the holder stirrer about 45°C and reassemble from
groove of the stirrer blade.
5) Remove holder stirrer and supporter stirrer.
6) Reverse the above steps for reassembly.
13. TO REMOVE NOISE FILTER
1) Remove a screw which secure the noise filter.
2) Remove a screw which earth to wire from noise filter.
3) Remove a noise filter from the bracket noise filter.
14. TO REMOVE SPEAKER
1) Remove a screw which secure the base plate and
speaker holder
2) Remove speaker holder and speaker
Fixture
Supporter
Stirrer
22
Holder Stirrer
Supporter
Stirrer
Stirrer Blade
COVER
WAVE
GUIDE