Disabling The Tangle-Free Finish Function After Spin Operations; Maintaining Softness After Drying Operations (Soft Guard) - Hitachi BD-W3300 Operating Instructions And Owner's Manual

Disabling the Tangle-Free Finish function after spin operations

 This function untangles laundry (for 2 to 4 minutes) after the spin cycle of [WASH] operations. 
(This does not operate in the [SOFT], [BLANKET], [DELICATE], [WASH DRY], [DRY], and [CLEAN]
programs.) The remaining time indicator blinks during Tangle-Free Finish operations.
Press to turn on the power.
Hold the button for at least 3 seconds.
Press to turn off the power.
 This setting will be saved.
To change the setting, perform the same operation.
 The Tangle-Free Finish function may not operate for large wash loads (6 kg or more).
 The Tangle-Free Finish function will not operate for operations that do not include the wash cycle.

Maintaining softness after drying operations (Soft Guard)

 This function continues drum rotation until you remove the laundry to maintain softness after 
drying operations.
The door is locked during Soft Guard operations, so press the [PAUSE] button before opening
the door. (This function does not operate in the [BLANKET], [STATIC DRY], [DEODORANT], and
[FUZZY (10 MIN)] programs.)
Soft Guard operation
The remaining time indicator blinks
"000" during Soft Guard operation,
and is lit.
Press to turn on the power.
Hold the button for at least 3 seconds.
Press to turn off the power.
 This setting will be saved.
To change the setting, perform the same operation.
To change the default setting
The function operates for about 2 hours, rotating the drum for 12 seconds every
5 minutes.
You can release the door lock by pressing the [PAUSE] button.
Operation finish sound
(melody or buzzer)
To change the default setting
The setting changes as follows each time the button
is held for 3 seconds.
On (default setting)
Off
(The Tangle-Free Finish function
is disabled.)
Soft Guard operation
Pause
Drum rotation
Alternates between
About 5 min About 12 sec pause and drum rotation
About 2 hr
The setting changes as follows each time the button
is held for 3 seconds (the beep length indicates the
setting).
On Long beep sound
Off (default Short beep sound
setting)
69