Problems During Operations; Operations - Hitachi BD-W3300 Operating Instructions And Owner's Manual

Troubleshooting
Symptom
Rinse operations
differ from the
settings.
[EX] is lit, but water
injection does not
occur.
The machine
returns to the rinse
operation during
the spin operation.
The drum rotation
speed changes
during the spin
operation.
The indicator
HIGH
lights during spin

operations.

The Tangle-Free
Finish operation
does not occur
after spinning.
The spinning
operation seems
insufficient (i.e.,
laundry is still wet).
88
(continued)

Problems during operations

Possible cause
Is the laundry concentrated on one side?
 If so, another rinse operation may be added
to correct this. (The remaining time indicator
will increase, but the display for the number of
rinse operations will not.)
Did you add excessive amounts of detergent?
 If foaming is excessive during the rinse and
spin operations, the setting will be changed to
Water-Injection Rinse to reduce the foam.
 If the laundry could not be evenly distributed
during the spin operation, the setting will
change to Water-Injection Rinse automatically.
 When two or more rinse cycles are set, the first
rinse operation will always be Sprinkle Rinse.
(P. 60)
 Softener is added during the final rinse. In
order to mix in the softener, Water-Injection
Rinse will automatically change to Normal
Rinse during the final rinse.
Did the laundry gravitate to one side during the
final spin?
 If so, the machine will return to the rinse
operation to correct this.
 The drum rotation speed adjusts automatically
according to the wash load size and
distribution.
Are you running the [SOFT] program?
 If so,
will light because the heater is used
HIGH
during the spin operation.
Did you disable the Tangle-Free Finish function?
 The Tangle-Free Finish function will not operate
for operations that do not include the wash
cycle.
Is the wash load large?
 The Tangle-Free Finish function may not
operate for large wash loads (6 kg or more).
Is the spin cycle set to a short running time?
Solution
Load laundry into the drum carefully to avoid
concentration on one side.
Refer to the detergent indicator to determine the
appropriate amount of detergent.
This is not a malfunction.
This is not a malfunction.
This is not a malfunction.
This is not a malfunction.
This is not a malfunction.
This is not a malfunction.
For details on the Tangle-Free Finish setting, see
(P. 69).
This is not a malfunction.
This is not a malfunction.
Set the spin cycle to a longer running time.
(P. 55)
(P. 19, 20)
(P. 26, 27)