Control Panel Functions - Hitachi BD-W3300 Operating Instructions And Owner's Manual

Control Panel Functions

Detergent indicator
(P. 26)
Indicates the suggested amount
of detergent to use.
Use the HOT WASH function (P. 65)
Blow hot air onto laundry to
activate the detergent for more
complete cleaning.
 The [HOT WASH] indicator lights
when set, and blinks during
operation.
 This function cannot be used during
the [BLANKET] and [DELICATE]
programs and during [DRY] and
[CLEAN] operations.
Set the CHILD LOCK (P. 33)
Prevent children from opening the
door.
 The
indicator lights when this is
set.
 Examples of indicator displays during operation ( 
[WASH (30 MIN)]
in progress
[RINSE (2 times)]
in progress
 During the defoaming operation, water for defoaming is injected
from the front side of the drum after first draining the water (for
up to 15 minutes).
8
Change the cycle settings (P. 55, 60, 61)
Combine and change [WASH], [RINSE], [SPIN],
and [DRY] cycle settings.
 Press [PAUSE] after the machine starts to change
the settings. Settings cannot be changed after the
[WASH] cycle finishes.
 The settings cannot be changed when only the
[WASH] cycle is used.
 The settings cannot be changed for some programs.
Use the DELAY START
function (P. 58, 59)
Set the machine to finish
operation 3 to 12 hours later
in 1-hour increments.
 Delay times cannot be set for
some programs.
 [DRY] operations and [CLEAN]
programs cannot be delayed.
[SPIN (4 MIN)] in progress
Defoaming in progress
(display rotates during
[WASH] cycle)
indicates blinking)
(P. 91)
Remaining time and delay
indicators (P. 26, 58)
Indicates the remaining time
after operation starts, or
displays the delay time with
each press of the [DELAY
START] button.
After starting, only the [DELAY]
indicator is lit.
Soft Guard operation in
progress
An error has occurred
(e.g., [C08])
Drying operation on standby
(P. 92)
Tangle-Free Finish operation
in progress (P. 92)