Advertisement
*The RTS/CTS must be disable if the user using the RS422/485 function.
4. Getting start
4-1.TRP-C51 default Settings
Bluetooth Status
Name: TRP-C51
Password: 1234
Connection Mode: Slave
Device: Discoverable
UART Status
Baud Rate: 9600
Data Bit: 8
Parity Check: None
Stop Bit: 1
RTS/CTS Flow Control: Disable
4-2. Configure TRP-C51
Step1. Use a Null modem cable (crossover female to female cable) to make a connection
between the TRP-C51 DB-9 connector and PC DB-9 connector.
Step.2 Run the TRP-BT Utility by window
User may find the TRP-BT utility in TRP-C51 support CD.
7
Advertisement
Need help?
Do you have a question about the TRP-C51 and is the answer not in the manual?
Questions and answers